Product Attribute | Attribute Value |
Type | Analog Switch|Analog Multiplexer |
Polarity | Non-Inverting |
ECCN (US) | 3A001.a.2.c |
Part Status | Active |
Configuration | Triple 2:1 |
Input Signal Type | Single |
Power Supply Type | Single|Dual |
Output Signal Type | Single |
Chip Enable Signals | Yes |
Switch Architecture | SPDT |
Multiplexer Architecture | 2:1 |
Maximum Turn-On Time (ns) | 110(Typ)@24V |
Number of Inputs per Chip | 6 |
Maximum Turn-Off Time (ns) | 100(Typ)@±5V |
Number of Outputs per Chip | 3 |
Maximum On Resistance (Ohm) | 1050@5V |
Maximum Supply Current (mA) | 0.06@5V |
Number of Channels per Chip | 3 |
Typical Supply Current (mA) | 0.017@5V |
Maximum Dual Supply Voltage (V) | 0|24 |
Minimum Dual Supply Voltage (V) | 5|-15 |
Typical Dual Supply Voltage (V) | ±5|±9 |
Maximum On Resistance Range (Ohm) | >=1000 |
Maximum Single Supply Voltage (V) | 24 |
Minimum Single Supply Voltage (V) | 5 |
Typical Single Supply Voltage (V) | 3.3|5|12|16|20 |
Maximum Operating Temperature (°C) | 125 |
Minimum Operating Temperature (°C) | -55 |
Maximum Frequency (25°C) @ Vcc (MHz) | 850(Typ)@24V |
Maximum Low Level Output Current (mA) | 10 |
Maximum High Level Output Current (mA) | 10 |
Maximum Propagation Delay Bus to Bus (ns) | 20@5V |
Description |